The D60x90 S3 Navigator® horizontal directional drill is significantly more powerful and quieter than its predecessor — with the interactive Aurora® digital display to help you get the job done faster and more efficiently.
This machine packs all these valuable benefits into a modest footprint — making it an ideal fit for large commercial or confined urban jobsites.
With up to 60,000 lb (266.9 kN) of thrust and pullback — an impressive 17 hp (13 kW) increase over its previous model (D60x90 Navigator® horizontal directional drill) — the D60x90 S3 is the drill that will take your operation to a whole new level of productivity.
The D60x90 S3 boasts up to 60,000 lb (267 kN) thrust/pullback and 9,000 ft-lb (12,202.4 Nm) of rotational torque at just 100" (254 cm) wide and 26' long (7.9 m), so it’s qualified for a range of installation specifications even in congested urban jobsites.
The D60x90 S3 boasts a sizeable 17 hp (12.7 kW) increase over its predecessor, the D60x90, giving operators more power for drilling in difficult ground conditions.
The D60x90 S3 has a guaranteed sound power rating of just 107 dBA – 12 dBA lower than its predecessor the D60x90 – resulting in reduced noise at operator’s ear [83 dBA], increased operator comfort and less noise disturbance in residential or urban areas.
The D60x90 S3 features a large open-top vise design for the purpose of removing and adding tooling.
Easy-to-operate and reliable rod loader is inspired by the popular and proven D24x40 Series II design.
Interactive, full-color display provides real-time location information plus tools to complete drilling activities more efficiently, and can replace the need for hard copy bore plans.
GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 29.5' (9 m)
Min transport width: 100" (254 cm)
Min transport height: 104" (264.2 cm)
Weight: 39,000 lb (17,690.1 kg)
Make/Model: CAT 7.1
Fuel type: Ultra low sulfur diesel
Max engine rpm: 2200 rpm
Gross horsepower: 202 hp (151 kW)
Max torque: 642 lb-ft (870 Nm)
Displacement: 433.3 cu-in (7.1 L)
Cooling method: Liquid
Aspiration: Turbo Charged
Emissions rating: Tier 4 Final (EU Stage IV)
Thrust/Pullback: 60,000 lb (266.9 kN)
Max carriage speed at max engine rpm: 175 fpm (53.34 m/min)
Max spindle torque (low at max engine rpm): 9000 ft-lb (12,204 Nm)
Max spindle speed at max engine rpm: 200 rpm
Min bore diameter: 6" (15 cm)
Max ground drive speed at max engine rpm (fwd): 3.7 mph (6 km/h)
Noise level at operator’s ear: 83 dBA
Drill rack angle: 12°-15° (21.3%-26.8%)
DRILLING FLUID SYSTEM
Max flow: 150 gpm (567 L/min)
Max pressure: 900 psi (6.2 MPa)
Breakout system: Standard top load hydraulic vise
Drilling lights: Standard
Flow indicator: Standard
Stakedown system: Optional
Strike alert: Standard
Remote lockout: Standard
DRILL PIPE OPTION ONE
Type: Firestick® drill rod
Length: 15' (4.6 m)
Rod diameter: 2.875" (7.3 cm)
Weight: 180 lb (81.7 kg)
Bend radius: 168.7' (51 m)
Onboard capacity: 600' (182.9 m)
DRILL PIPE OPTION TWO
Type: Firestick drill rod
Length: 15' (4.6 m)
Rod diameter: 3.5" (8.9 cm)
Weight: 250 lb (113.5 kg)
Bend radius: 197.7' (60 m)
Onboard capacity: 360' (109.7 m)
Copyright © 2019 Exceed Drilling Technologies - All Rights Reserved.
Powered by GoDaddy Website Builder